ʻO nā welders maikaʻi loa hiki iā ʻoe ke kūʻai

Ma ka ʻatikala ma mua ua wehewehe au i nā mea āpau e pono ai ʻoe e ʻike e pili ana i kahi welder a welder. Ma kēia ʻatikala ʻē aʻe mākou e hōʻike ai nā mīkini wiliwili maikaʻi loa hiki iā ʻoe ke kūʻai e hoʻomaka i kēia hui metala. Eia kekahi, e ʻike ʻoe i nā mea pono āpau e loaʻa ai kāu pahu kuʻihao piha ...

Eia kekahi, e hoʻomanaʻo hiki iā ʻoe ke hoʻohui i kēia ʻatikala me nā ʻatikala ʻelua ma mua o kēia kumuhana, e like me ka mea ma koho i ka welder maikaʻi loa a me ka kumu aʻo e aʻo i ka wili.

maikaʻi loa welders

Eia ka nā mīkini wiliwili maikaʻi loa hiki iā ʻoe ke kūʻai i kēia lā, a no ke kumukūʻai kūpono:

MMA maikaʻi loa (Manual Metal Arc) a i ʻole arc (STICK) welders

Me MMA welders Hiki iā ʻoe ke wili i nā ʻano metala like ʻole, e like me ke kila kalapona, ke kila kila, ka aluminika, a i ʻole ka hao. Pono ʻoe e koho i ka electrode kūpono no ia. Eia kekahi, he mea kūpono ia no ka wiliwili ʻana i kahi e pono ai ka bead ākea a i ʻole e hoʻopiha i nā wahi nui:

• Maʻamau, me nā mea hana a me ka paʻa electrode. Kūpono no nā ʻano hana āpau a i ʻole no nā ʻoihana:

• Paʻa, ʻano pistol, kahi huahana maikaʻi e lawe maʻalahi i nā wahi āu e makemake ai a no ka poʻe hoʻomaka:

MIG (Metal Inert Gas) welders maikai loa

I kēia manawa ua holomua ka ʻenehana i hiki iā ʻoe ke loaʻa MIG welders me ka ʻole o ka hoʻohana ʻana i ke kinoea, he mea maikaʻi loa ia. Me lākou hiki iā ʻoe ke weld i nā ʻano metala like ʻole e like me ke kila a i ʻole ka hao, akā i kēia hihia me ka hoʻohana ʻana i nā wili wili, e hana ana i kahi wili weld ʻoi aku ka maikaʻi a pololei.

ʻO nā mea welder MAG (Metal Active Gas) maikaʻi loa

Ma ka lima ʻē aʻe iā mākou ka Nā mea wili MAG, kekahi ʻano welder e like me ka mea ma mua, akā ma kahi o ka hoʻohana ʻana i ke kinoea inert, hoʻohana ʻia ke kinoea hana i kēia hihia. A i ʻole, ua like ia:

ʻO nā mea welder TIG (Tungsten Inert Gas) maikaʻi loa

Ma kēiaʻano TIG welders hoʻohana ʻia kahi electrode tungsten i pau ʻole e like me ke ʻano o nā electrodes maʻamau. Hoʻohana wale kēia electrode e hana i ke arc e hoʻoheheʻe i ka metala, akā ʻaʻole hāʻawi i nā mea. Hiki iā lākou ke koho maikaʻi i kekahi mau hihia kahi e pono ai ke kūʻai aku i ka nui o nā hui, akā ʻaʻole ia ka mea i manaʻo ʻia, ʻoi aku ka nui o nā mea hoʻomaka:

ʻO nā mea welder lehulehu maikaʻi loa (MMA, MIG, TIG)

Me kēia ʻano mea hana Hiki iā ʻoe ke koho i ka solder e hoʻohana ai, no ka mea, loaʻa iā lākou nā mea paʻa electrode a me nā nozzles thread. He mau lako pono loa ia no nā poʻe hoʻomaka e makemake e hoʻāʻo i nā ʻano like ʻole o ka welding a no nā ʻoihana:

ʻO nā mea welder laser maikaʻi loa

Una mīkini wiliwili laser E ʻae iā ʻoe e hana i nā hui ikaika, pololei a maikaʻi hoʻi i hoʻohui ʻia e hui kokoke ma lalo o nā kūlana. Eia nō naʻe, he mau mea waiwai nui lākou, i mālama ʻia no nā ʻoihana a i ʻole nā ​​​​ʻoihana e pono maoli i kēia ʻano welders no nā noi holomua.

ʻO nā mea welder plastik maikaʻi loa

El hiki ke "welded" i ka plastic, a ʻaʻole wale ka polymer-thermoplastic plastic e like me kā mākou i ʻōlelo ai ma nā ʻatikala mua. Akā no kēia, hoʻohana ʻia kahi "hoʻopunipuni" ma ka hoʻokomo ʻana i kahi mea wela wela me kēia ʻano pū:

nā hao hao maikaʻi loa

ʻOiaʻiʻo ua loaʻa iā mākou wiliwili tini hoʻohana ʻia no ka uila. I loko o kēia mau mea mākou i ʻelua mau ʻano kumu:

• Maʻamau, me nā ʻōlelo aʻoaʻo hiki ke hoʻololi a me ka hoʻohana ʻana i ka uea tin me kekahi lima:

• ʻAno Pistol, kahi e hiki ai iā ʻoe ke hoʻouka i ka ʻōwili pahu i ʻole ʻoe e hoʻohana i nā lima ʻelua, e ʻoi aku ka ʻoluʻolu:

pū wela a me nā lama

ʻO ka hope, loaʻa iā mākou pu wela. ʻAʻole kēia he welders i loko o lākou iho, akā hiki ke hoʻohana ʻia e weld thermoplastics, e hoʻoheheʻe i nā metala me kahi wahi hoʻoheheʻe haʻahaʻa e like me ka tin, e weld i nā paipu keleawe ma ke kahua o ka paipu, etc.

• Me ke kaula, ʻo lākou ka mea ikaika loa a hiki i ka wela kiʻekiʻe:

• Me ka pākaukau, hiki ke lawe i kahi āu e pono ai me ka ʻole o nā kaula, ʻoiai ʻoi aku ka liʻiliʻi o ka ikaika ma mua o nā mea ma mua:

• A maanei au e hoolauna aku ai i ka puhi puhi a lama paha no ka hana paipu:

• lama no nā mea kūʻai aku (gula, kālā,…):

welder wahi pākahiko

No ka uila, no nā ʻōhua weld wahi, he mea maʻalahi hoʻi ka loaʻa ʻana o kekahi o kēia:

Nā mea hoʻohana no nā welders

Ma ke'ano o mea hoopau no ka wiliwili iā mākou:

Electrodes no ka MMA welders

Eia iā ʻoe ka nā electrodes no ke kuʻi ʻana i ke kila kalapona, ke kila galvanized, a me ka hao. ʻO lākou ka mea maʻamau, ʻoiai hiki iā ʻoe ke loaʻa i nā electrodes kikoʻī no ka wili ʻana i ke kila kila, aluminika, etc.

electrodes no ke kila kila:

electrodes no alumini:

tungsten electrodes

Ma kekahi ʻaoʻao, loaʻa iā ʻoe tungsten electrodes e wiliwili i nā ʻano metala like ʻole no nā mea welder TIG. ʻAʻole kēia mau mea e hoʻohui i nā mea, a ʻaʻole e luhi e like me nā electrodes maʻamau:

ʻO nā ʻōwili uwea hoʻoheheʻe no MIG/MAG

No ka welder uwea (electrode mau) loaʻa iā mākou nā ʻōwili a i ʻole nā ​​ʻōwili e like me kēia no ke kila kalapona, ke kila galvanized, ka hao, etc. Hiki iā ʻoe ke loaʻa iā lākou o nā anawaena like ʻole, ka mānoanoa a me nā ʻano no nā welds kikoʻī. ʻO kekahi o nā mea i manaʻo nui ʻia ʻo kēia:

Aia kekahi mau ʻōwili kūikawā no ke kila kila:

a no ka alumini:

ʻO nā pahu plastik e hoʻoheheʻe

Inā ʻoe e hoʻohana i hoʻokahi pū puhi wela no ka wiliwili ʻana i nā thermoplastics, loaʻa iā ʻoe nā ʻano pahu plastik e hoʻoheheʻe ʻia e like me kēia:

nā pahu alumini no ka hoʻolei ʻana

Inā ʻoe e hoʻohana i hoʻokahi pū puhi wela a i ʻole ka lama kinoea no ka wili alumini, pono ʻoe e kūʻai i kēia mau pā:

nā mea koʻikoʻi no ka plastic

Akā, inā ua koho ʻoe i ka mea welder plastik me ka hoʻohana ʻana i nā staples, a laila pono ʻoe e kūʻai i kēia mau mea hoʻohana ʻē aʻe:

uwea tin

ʻOiaʻiʻo, ma keʻano o nā welds no ka mea uila a paipu paha, loaʻa iā ʻoe ke koho e kūʻai i nā ʻōwili tin o ʻelua ʻano:

• Uea no nā mea uila, no ke kūʻai ʻana me ke alakaʻi ʻole a me ka flux-resin core:

• Uea no ka paipu, ke tini paʻa a ʻoi aku ka mānoanoa ma mua o ka mea ma mua e hoʻopaʻa i ke keleawe:

Gas no ka MIG/MAG welders

hiki iā ʻoe ke loaʻa pahu kinoea argon no nā welders penei:

ʻO nā ʻāpana a i ʻole nā ​​ʻāpana ʻāpana

Aia kekahi nā ʻāpana ʻāpana a i ʻole nā ​​​​mea ʻokoʻa no ka poe wiliwili. Ma waena o nā mea pinepine loa:

Electrode paʻa no MMA welders

Hiki paha iā ʻoe paʻa electrode o kou welder ua poino, ma keia hihia, oe ke hoohana i keia kaawale:

Nozzles no ka MIG/MAG welders

ka nozzles kahi e hele ai ke kaula a pono e hoʻololi ʻia ke kinoea i kēlā me kēia manawa:

paʻi honua

Ua pinepine ka paʻa honua ua poino no hoi me ka hoohana ana, e pani ai:

ʻaoʻao hao hao

Hoʻopau ʻia nā ʻōlelo aʻoaʻo i ka wā. ʻOiaʻiʻo, no nā hana like ʻole a me ka hoʻopau me ka tin e pono ai ʻoe mau ʻōlelo aʻoaʻo like ʻole, e like me nā mea o kēia pāʻani:

mea wiliwili

ʻoiaʻiʻo ʻoe pahu kūʻai ʻAʻole ia e piha me ka ʻole o nā mea hoʻohui ʻē aʻe e pono ai, ʻoi loa no kou palekana:

welder masks

• ʻO ka lima lima maʻamau, hiki iā ʻoe ke paʻa me ka lima hoʻokahi a wehe koke:

• ʻO ka mahiole maʻamau, waiho ʻia nā lima ʻelua, akā no ka wehe ʻana i ka pale ʻeleʻele ʻaʻole ia e wikiwiki e like me ka mea ma mua, no ka mea, pono ʻoe e hāpai i ka mask:

• ʻOkoʻa, e like me ke ʻano mahiole maʻamau, akā me nā pale ma kahi o ke aniani, hiki ke ʻike i kahi āu e hoʻokomo ai i ka electrode a me ka pōʻeleʻele i ka wā e hoʻomaka ai ka sputtering, me ka ʻae ʻana i nā hoʻololi:

kaʻa wiliwili

Me kēiaʻano Hawaiian Hiki iā ʻoe ke lawe i ka hui mīkini wiliwili a me nā ʻōmole kinoea a i ʻole nā ​​cylinders no ka poʻe e pono ai:

nā noho wili

Loaʻa iā ʻoe kekahi nā papaʻaina a me nā noho e kūʻai ʻoluʻolu, e like me kēia:

Kākoʻo hoʻoheheʻe uila

ʻO kahi ala ʻoluʻolu e wili ai, ʻo ia ka hoʻohana ʻana i kēia ʻano kākoʻo me ʻūlili e hoʻokuʻu i kou mau lima i hiki iā ʻoe ke wili maikaʻi, a loaʻa iā lākou kahi aniani hoʻonui e ʻike i kāu mea e hana nei ma lalo o ka hoʻonui.

mīkina lima no ka welder

No e pale i kou mau lima mai ke ahi, he mea nui e hoʻohana i kēia mau ʻano mīkina lima:

Mākēneki no ka hoʻopaʻa ʻana a me ka hoʻopaʻa ʻana

Pono ka hana maikaʻi i ka wā wili. No kekahi mau metala hiki iā ʻoe ke hoʻohana i nā square magnetic e hoʻonoho iā lākou ma kahi me ka ʻole o ka neʻe ʻana, a i ʻole hiki iā ʻoe ke hoʻohana i nā ʻāpana:

ʻO ka pale kinoea ʻona

Inā ʻoe e hoʻohana i kekahi mau electrodes tungsten a i ʻole ʻoe e wili i ka galvanized, hiki iā lākou ke wehe. nā kinoea ʻona hiki ke hoʻopilikia i kou māmā. No ka pale ʻana, e hoʻohana mau ʻoe i kēia mau ʻano masks:

Slag Hammer

ʻOiaʻiʻo no e wehe i ka lepo i koe ma ka weld bead, pono ʻoe i kekahi o kēia mau hamare e paʻi a wehe i ka pūpū:

palapala pala

Hiki iā ʻoe ke hoʻohana i kēia ʻano pulupulu metala bristle No ka ʻohi ʻana i ka pala a me ka hoʻomaʻemaʻe ʻana i nā welds:

Mea wili

He mea nui ka loaʻa ʻana o kahi mea wiliwili ʻO kēia ʻano, e hoʻomaikaʻi i ka hoʻopau ʻana o ka weld seam, a me ka hoʻomaʻemaʻe ʻana i nā profiles e welded a wehe i ka ʻōpala, nā ʻāpana pena, a me nā ʻano lepo āpau.

A ʻoiai, nā diski no ka metala:

ʻAʻohe huahana i loaʻa.

Nā mea ʻē aʻe (ʻokoʻa)

Ua nohoʻo También ʻokoʻa o nā mea ʻokoʻa (koho) hiki ke kōkua iā ʻoe i ka wā hana wili, e like me:

• kāmaʻa pale me nā manamana wāwae i hoʻoikaika ʻia e pale aku i ka pōʻino mai ka paʻi ʻana a me ke kapuaʻi insulating:

• pale ahi no ka pale ʻana i nā mea maʻalahi mai nā huna ahi:

• Loaʻa iā ʻoe kekahi baboon no ka pale ʻana i kou ʻaʻahu mai nā ʻulaʻula a me nā kuni, a i ʻole nā ​​ʻōpala...
  

• nā lole hana pale ahi No ka pale ʻana i kou kino holoʻokoʻa, no ka mea, ʻaʻole ʻōlelo ʻia nā lima pōkole a i ʻole nā ​​pōkole:

Metala e hoʻomaʻamaʻa

ʻO ka hope, ʻaʻole paha ʻoe nā meahana ma ka home e hoʻomaʻamaʻa, a ʻo ia ke kumu e hōʻike aku ai mākou iā ʻoe i kekahi mau huahana hoihoi āu e kūʻai ai e hoʻomaka i ka hoʻāʻo ʻana a me ke aʻo ʻana i ka weld:

Irons

Ma ke mākeke hiki ke ʻike papa a pepa paha o ka metala o ka manoanoa like ole penei:

Nā kihi a me nā papa

Hiki nō hoʻi iā ʻoe ke hoʻohana nā kihi a i ʻole nā ​​papa, he mea maʻalahi no ke kūkulu ʻana i nā hale he nui:

ʻO ka pua

ʻOiaʻiʻo, inā ʻoe e kūkulu i nā hale māmā, kahi koho maikaʻi e hoʻohana pākalo, huinaha a poepoe:

nā kaola

ʻO ka hope, inā makemake ʻoe e hoʻokō i kahi ʻano paʻa a paʻa loa, e like me ka hale, hiki iā ʻoe ke koho nā kaola: